一、Product and usage:                                                            

二、LED Fluorescent tube adopts the new generation high brightness low power SMD LED as the light sources. The features are as follow:

Energy-Saving: The brightness is less than 60% for the equivalent normal fluorescent tube, power consumption is less than about 80% for the equivalent incandescent, the power PFC ≥ 92%, power conversion efficiency ≥ 90%, and consistent with energy efficiency standards.

Environmental protection: No Infrared, No Ultraviolet Radiation , free of harmful substances mercury content, meet the ROHS requirements. It is typical green light source

Life: LED life span is up to 50,000 hours, there is no delay time when lighting, and switching frequency does not affect the life of light source.

Save: Not easily damaged. It is green and no pollution; has been passed the CE certification.

Wide application scope: Can be worked well under the low temperature.

.

Adaptation places: Widely use in Hospitals, offices, retail stores, supermarkets, schools, hotels, factories, car parks and other indoor places.

二、   Optical properties and technical parameter：

  ⅠSMD T8LED TUBE (φ30mm)

Ⅱ. Operating Environment:

Ⅲ. Test Contents

四、Tube Size：

五、Package:

六、The installation drawing:

     1．Modify the original light connection wiring diagram is follows：

2．The new wiring connection diagram is as following:

   3．Installation:

七、警告：

1. Our LED tubes are only used with the lighting fixtures which are provided by us.

2 .When install our tubes to the other light fixtures or, please remove the ballast and starter (See above wiring diagram), otherwise tubes will not work or increase consumption, etc.

3 This product is only for indoor use.

4 .Please choose the correct working voltage as per the requirements in the label.

5. Please don't put into water, don't knock or shock the tubes during delivery, don’t press or move the tubes roughly.

6. If you any questions, please contact us.